772-335-5200

INSTRUCTIONS

Superior impression trays are easily cleaned and sterilized!


Trays

Order numbers 1000 – 3000 —STAIN RESISTANT NICKEL PLATED BRASS TRAYS

  • Disinfecting: Follow the manufacturer’s directions using either of the following cold disinfectants. Cetylcide — Cetylite Industries, NJ 08110, Multicide Plus — Biotrol International, CO 80027
  • Sterilizing: We recommend the following environmentally friendly methods, Dry Heat – Do not use temperatures over 390 degrees Farenheit. Autoclave – Follow the manufacturer’s directions using distilled water. Place trays in autoclaving pouches when using chemicals in the autoclave. Do not use temperatures over 390 degrees Farenheit.

How to obtain long satisfactory service from your new superior nickel plated impression tray.

SUPERIOR Nickel plated trays are made of brass with soldered rim and nickel-plated. Modifications of the tray should be slight and carefully made with finger pressure. Do not use pliers. Excessive manipulation will crack plating.

Cleaning: To clean remove the bulk of the impression material from the tray.  Immerse the tray in a solution of Coe Tray Cleaner and warm water for 15-30 min.  Stubborn particles of alginate may then be removed by lightly brushing with a soft bristle brush.  Coe Tray Cleaner and warm water maybe used for removal of wax and compound.

Sterilization: Superior Metal Impression Trays– Nickel Plated maybe autoclaved at

250°F/121°C for 30 minutes.

Trays should be stored dry.

Water Cooled Tubing

Order numbers 2700 – 2701

  • Follow the manufacturer’s directions using any cold disinfectants or cold sterilization solutions.

Stainless Steel Trays

Order numbers 4000 – 5000 — COMPLETELY WELDED STAINLESS STEEL TRAYS

  • Disinfecting: Follow the manufacturer’s directions using any cold disinfectants
  • Sterilizing: We recommend using environmentally friendly methods such as Dry Heat or Autoclave.

How to obtain long satisfactory service from your new superior stainless steel impression tray.

SUPERIOR Stainless Steel Impression Trays are constructed of high quality stainless steel, with handles and rims that are welded, rather than  soldered.  The welding assures a complete, durable bond.  Stainless steel is a long lasting   material that will retain it’s shape even after     extended use.  Because of this characteristic,    rigidity, never use force to modify the shape of the tray.  The use of rope wax or compound is an option when adjustments are necessary.  To Clean your SUPERIOR Stainless Steel Tray, remove the bulk of the impression material from the tray.  Immerse the tray in a solution of COE Tray Cleaner and warm water for 15-30 minutes.  Stubborn particles of alginate, compound, wax, etc. may then be removed by lightly brushing with a soft bristle brush.  Whenever possible, trays should be stored dry.

NOTE Trays may be routinely sterilized by the following methods:

  • Autoclave
  • Chemical-vapor
  • Immersion (dental sterilant) in Coecide XL or Coecide XL+ glutaraldehyde products.

Disposable Trays

Order numbers 6000 — RIGID ALUMINUM TRAYS

  • Remove excess impression material and use this environmentally friendly procedure – place in aluminum recycling bin.